Wireless Remote & Receiver For Colour Changing LED Tape
Our simple remote control has a 15 metre wireless radio range & you can hide the receiver unit anywhere in the room. You do not need to point at the receiver to change the colour or programme.
It does 8 static colours, it will dim the brightness down on static colour. It also comes pre-programmed with 6 colour change programmes
Our remote control gives you excellent control over your lights, the maximum load for the receiver is 20m on our 30 led per metre strip and 10m on our 60 led per metre strip. In technical terms this is 144 watt.
For lengths above the maximum load you can use our RGB amplifier which will boost the signal. (Order Code SLGAMP)
- Colour Options; Red, Green, Blue, White, Orange, Yellow, Cyan, Purple
- Hold onto a single colour
- Fully Dim the brightness of single colour
- Auto Change, variable speed (You can control the speed)
- Fade between colours, variable speed (You can control the speed)
- Flash between colours, variable speed (You can control the speed)
- Jump between colours, variable speed (You can control the speed)
- Memory, It remembers the colour/setting you had switched on when you switch the power off and then back on.
- Please note battery's not included with remote.
- Battery needed for the remote is a 12V 27 AMP.
|Brand||SLG Lighting Ltd.|
|Number of Bulbs||No|
|How Many Lights?||No|